Unlinked Lifter fully enclosed in a box
by Jean-Louis Naudin
Cliquez ici pour la version Française
created on March 5, 2003 - JLN Labs - Last update March 5, 2003
Toutes les informations et schémas sont publiés gratuitement ( freeware ) et sont destinés à un usage personnel et non commercial
All informations and diagrams are published freely (freeware) and are intended for a private use and a non commercial use.

The purpose of this test is to confirm that the ionic wind emitted by the wire placed above the aluminum plate is not the cause of the main upwards thrust of the Lifter. I have used the same unlinked Lifter previously tested on February 20, 2003. The wire has been completly mecanically unlinked from the main aluminum armature. The thin wire, connected to the HV generator, is handled by myself and the aluminum armature, connected to the ground, is able to go upwards freely like a common Lifter. This aluminum armature is now fully enclosed in a cardboard box ( 5 mm thick ). A rectangular window, cut on one side of the box and covered with a plastic screen, allows to observe the enclosed Lifter.

The aluminum armature of the Lifter, connected to the ground, is free to move upwards inside the box.
The height of the hovering is limited by three thin nylon wires fastened to the base.
The thin copper wire, connected to the (+) of the HV generator is mounted on a balsa wood frame and handled by myself.

The aluminum armature of the Lifter is fully enclosed in a cardboard box, so there is no possible flow of ionic wind
through the cardboard box ( 5 mm thick ) and thus around the shape of the Lifter.

TESTS RESULTS :

When the wire is approached above the aluminum plate, while the HV generator is switched on, the aluminum armature, fully enclosed in the box, goes upwards quickly towards the wire. There is no ionic wind coming from the wire flowing through the cardboard into the box.

Above, an animated video of the experiment.

See the test of the unlinked Lifter in a box

To see the video, the free downloadable RealPlayer is required
You may download free the RealPlayer 8 Basic at : http://proforma.real.com/real/player/blackjack.html

Click on the picture above to see the video ( 260 Kb )

JL Naudin's comments : This test of the Lifter with the wire mechanically unlinked and fully enclosed in a box proves definitely that :

• The ionic wind emitted by the wire is not responsible of the main upwards thrust of the Lifter,

• The aluminum plate is attracted upwards, toward the charged cloud generated by the wire placed above,

• The Lifter is able to work with the source of the charged cloud linked or unlinked to the main aluminum armature.

In the previous tests about the evidence of an asymmetric force between armatures, it has been demonstrated that :

• The attraction force of the plate towards the wire is stronger than the attraction force of the wire towards the plate,

• There is an asymmetrical force between the plate and the wire,

• The upwards thrust of the Lifter is the result of this asymmetrical force between the armatures.

See also :

Unlinked Lifter with the wire placed in a VACUUM tube

Evidence of an asymmetric force between armatures

Lifter test with the wire unlinked from the plate

Email : JNaudin509@aol.com

Return to the Lifter home page